Factors affecting hot melt adhesive film

Oct 13, 2024

What are the factors that affect hot melt adhesive film?

Hot melt adhesive film is used for bonding between two different materials, but in fact it is the same principle as double-sided adhesive. It has good adhesion, strong washability, and the heat transfer material is seamlessly bonded to heat-resistant fabrics.

1. Color: Due to the different colors of combustible materials, the color requirements for hot melt adhesive films must be different. However, if the content itself has no special requirements for color, it is recommended to use yellow hot melt adhesive. Generally speaking, the viscosity of yellow hot melt adhesive is better than that of white hot melt adhesive.

2. Surface treatment: The surface treatment of hot melt film in subsequent water is not as strict as any other adhesive. But secondly, the dust and grease on the surface must also be properly handled so that the hot melt film technology can achieve better bonding effect.

3. Operation time: Fast operation is the main feature of hot melt adhesive film. The working time of hot melt film is generally about 15 seconds. With the widespread use of modern production assembly lines, the working time of hot melt film is required to be shorter and shorter. For example, in the case of book binding and speaker manufacturing, the working time requirement for hot melt film is about 5 seconds.

4. Thermal stability: Hot melt film is sensitive to temperature. When the temperature reaches a certain level, the hot melt film begins to soften, and when the temperature is lower than a certain level, the hot melt film becomes brittle. Therefore, the selection of hot melt film should fully consider the product's situation when the ambient temperature changes.

5. Viscosity: The viscosity of the hot melt adhesive film is divided into early viscosity and late viscosity. The initial viscosity and late viscosity must be consistent to maintain the stability of the hot melt adhesive and insulation. In the production process of hot melt adhesive, it is necessary to ensure oxidation resistance, halogen resistance, acid resistance and plasticity. Then, according to different materials, the viscosity of the hot melt adhesive film is different, so different hot melt adhesive films need to be selected according to different materials.

https://www.hotmeltadhesive-film.com/

You Might Also Like