High and low temperature resistance of hot melt adhesive film

Nov 30, 2024

The high and low temperature resistance of hot melt adhesive film is an important performance indicator and is significantly affected by the following factors.

1. The chemical composition of the film itself

Polymer type: The performance of hot melt adhesive films made of different polymers varies greatly. For example, polyamide (PA) hot melt adhesive film has excellent high temperature resistance. This is because the amide bonds in its molecular chain make the intermolecular force stronger, and the molecular chain is relatively stable at high temperatures, and can withstand high temperatures of 180-220°C. However, the molecular chain of ethylene-vinyl acetate (EVA) hot melt adhesive film is highly flexible, and the molecular chain is easy to slide at high temperatures. It may soften and become sticky at around 80-100°C. Thermoplastic polyurethane (TPU) hot melt adhesive film has excellent low temperature resistance. Its molecules are composed of hard segments and soft segments. The soft segment provides good flexibility and can still maintain elasticity at -20--40°C.

Additive ingredients: Additives play an important role in high and low temperature resistance. Antioxidants can prevent hot melt adhesive film from oxidative degradation at high temperatures. In high temperature environments, antioxidants capture free radicals, inhibit oxidation reactions, and extend the service life of the film. Plasticizers can improve flexibility at low temperatures, but excessive addition will cause the film to soften and flow at high temperatures, reducing high temperature resistance.

2. Physical properties of the film

Thickness: The thickness of the film has an impact on the heat resistance. Thicker films transfer heat relatively slowly, which can delay the softening process at high temperatures. For example, at the same high temperature, a 1mm thick film may be able to withstand higher temperatures better than a 0.1mm thick film.

3. Application-related factors

Bonding material properties: The matching degree of the thermal expansion coefficient of the bonding material and the adhesive film is critical. If the thermal expansion coefficients of the two differ greatly, a large stress will be generated at the interface when the temperature changes. For example, when bonding metal and plastic, at high temperatures, due to the difference in thermal expansion coefficients, the adhesive film interface will be stretched or squeezed, which may lead to debonding and affect the temperature resistance.

Bonding process: Correct bonding process is a necessary condition to ensure high and low temperature resistance. If the film and material are not fully bonded and there is an air gap during bonding, the air expansion at high temperature will cause the film to separate from the material. Appropriate bonding pressure can make the film fill the pores on the surface of the material, enhance the bonding strength and temperature resistance. Insufficient heating time will lead to insufficient bonding, which is prone to problems when the temperature changes.

If you are interested in hot melt adhesive film , you are welcome to visit our official website www.hotmeltadhesive-film.com ! We look forward to cooperating with you, just like looking forward to a journey full of opportunities and innovations.

Polyolefin PO Hot Melt Adhesive Film

You Might Also Like