Aluminum Honeycomb Panel Hot Melt Film

 

The special hot melt adhesive film for aluminum honeycomb panel is a modified polyolefin thermoplastic bonding film, specially developed for the lamination of aluminum sheet and honeycomb core. It adopts 100% solid content formula, solvent-free, zero formaldehyde and odorless. It is non-sticky solid film at room temperature. It bonds aluminum skin and honeycomb core by hot pressing or roller lamination, forming high-strength adhesive layer after cooling. With excellent adhesion to aluminum material and high toughness, it effectively solves common problems of traditional liquid glue such as delamination, bubbling, yellowing and slow curing. Widely used in architectural decoration, all-aluminum furniture, rail transit, ships, aviation and curtain wall panels.

 

 

1.Professional Adhesion for Aluminum

Modified formula specially for aluminum materials. It has excellent adhesion to aluminum sheets and honeycomb cores with high peeling strength. No delamination, bubbling or hollowing after lamination.

2.Excellent Weather Resistance

 

UV resistance, high and low temperature resistance, damp heat aging resistance. No whitening, debonding or embrittlement for long-term outdoor service, suitable for curtain wall and outdoor decorative panels.

3.Smooth & Beautiful Surface

 

Uniform solid film without glue accumulation or flow marks. The panel remains smooth and flat without wavy lines after lamination, no corrosion to aluminum sheets.

4.Eco-friendly & Formaldehyde-free

 

Solvent-free, zero VOC and formaldehyde-free. No harmful benzene substances, complying with environmental standards for high-end furniture and construction projects.

5.High Production Efficiency

 

 

No glue mixing or air drying required. It shapes rapidly after hot pressing and cooling, greatly shortening production cycle and adapting to automatic mass production.

 

 

WT-E25-1 HOT MELT ADHESIVE FILM

 

This high temperature resistant hot melt film is designed for aluminum honeycomb panel bonding. It comes in rolls, with a standard length of 500 to 1000 meters per roll.

 

 

Zero VOC hot melt adhesive film for aluminum honeycomb can be used for bonding materials such as fiber fabrics, plastics, metals, wood, ceramics, etc. It is widely applied in the construction and home decoration industry, labeling, interior parts of the automotive industry, electronics industry, packaging industry, communication industry, etc.

Instructions for Use

1)The operating temperature of this Aluminum honeycomb panel hot melt film is 160-200℃. The surface of the objects to be bonded should be dry and without any oil stainless. if necessary, the surface should be roughened.

2)Place the Hot press hot melt film on the object to be bonded, heat it to above the melting temperature, apply appropriate pressure, peel off the release paper, then heat it to above the melting temperature again, and then laminate the other bonding surface, apply appropriate pressure, and it will cure instantly during cooling to complete the bonding.

Hot Tags: aluminum honeycomb panel hot melt film, China aluminum honeycomb panel hot melt film manufacturers, suppliers, factory